Completed: EIR Legion Standard Bearer Group!

I really liked this mix of Warlord Games (WLG) and Wargames Foundry (WGF) EIR Legion Standard Bearers (with Aventine round shields and LBMS decals).  They were fun to paint and I'm happy with the results.  Enjoy!

                                    

Finishing up: EIR Legion Standard Bearers!

Finishing up the group of EIR Legion Standard Bearers is a lot of fun because they are such unique minis with lots of character and animal pelts--Bears, Lions, Wolves!

Once all the mini's painting and gloss protective varnish was done and I'm satisfied with the job I've done, I now apply the "ground cover" to the base with a mix of HO railroad ballast and fine grit from G9.  I apply straight scenic PVA glue and then using a shot glass I pour the ballast mix on to the gluey base.  I shake of the excess and wipe the edges of the 2mm thick MDF round base (25mm) to remove stray glue and ballast.

Next I prep the dip (warm water soak) and apply it to the figures.  I stir it really well and always use an older set of brush.  I have the mineral spirits standing by.

The key for me is to apply the Army Painter Quick Shade "dip" varnish really thick in the folds and corners of the mini and then let it run down of the rest of the figure.  After 5 minutes or so I remove the excess dip with the mineral spirits (as I explained in my Primus Pilus tutorial).  This gives me a lot more control over how I let the varnish dip dry on the mini instead of the recommended shaking off of the excess dip (which not only makes a mess but is to random for my tastes).

I paint the base ground cover after the dip varnish has mostly dried using P3's Hammerfall Khaki as the main layer and then drybrush it with a variety of Vallejo Beige and Yellow Tan paints.

One of my last steps as I finish up the figure is to apply a small stone or two to the base.  I have odd shaped talus that I paint grey and then dry brush with straight white to make the small stones really stand out.

I ran into my first really bad "frosting" problem when I sprayed them with Army Painter Anti-Shine matte coating on these minis.  It was really bad on the Cornicen and the Eagle carrier.  I tried a second coat after shaking the can for a very long time, but it was still frosted and white-dotted.  After a quick search on the excellent TMP Forums, I found the olive oil solution thread and gave it a go.  And it worked...sort of.  It looked "oily" of course after I applied it, so I had to re-touch up with liquid matte varnish.

With the potential to ruin a lot of my painting efforts if this happens again, I think I might switch to the paint-on application of Testors Dull Cote liquid matte varnish in the future.

On the Painting Table: EIR Legion Standard Bearers

I started on my EIR Legion Standard Bearers first grouping.  From left to right, a Cornicen carrying the Century's Cornu (Horn), an Aquilifer carrying the Legion's Aquila (Eagle), an Imaginifer carrying the image bust of the Emperor, a Vexillarius carrying the Cohort's Vexilla (Flag), and a Signifer carrying the Century's Signum (Standard) with Philarae (Disks) topped with a Manus (Hand) image. 

I'm using a variety of colors on the animal pelts worn over the armor of the standard bearers.  P3's Ironhull Grey, Bastion Grey and Greatcoat Grey for the wolves.  P3's Bloodstone Brown and Gun Corps Brown for the bears.  I will wash and drybrush them later, so for now I do want sort of bright and gaudy looking colors.  I'm using Liquid Leaf's Classic Gold toxic paint to paint the gold portions of the standards.  I want it really shiny now as the Army Painter Quick Shade dip varnish will dull it down a lot.

Painting Table Tips: Whenever I open a new paint pot I add a few stainless steel nuts or washer to it. This helps stir the paint when I shake it prior to use in order to get a good mix of the paint pigments and the acrylic medium.  Also, after knocking over one to many paint pots, I drilled holes the correct sizes for both wide paint pots (like Foundry and P3) and the narrower Army Painter and Vallejo style paint bottles into wooden bamboo drink coasters flipped upside down.  This way the paint pots/bottles stay safe from me bumping into them and I can move them around quickly/easily without spilling them.